MGI JETvarnish 3D Web 400

Spot UV lakiranje, hot foil tisak i varijabilni tisak podataka u jednom prolazu
Rješenje s kontinuiranim (web-fed) ulaganjem materijala za proizvođače naljepnica i fleksibilne ambalaže
Za inline 2D i 3D spot UV premaz, reljefni hot foil tisak, izrezivanje (die cutting) i rezanje (slitting)
Omogućuje savršenu registraciju, brzinu do 42 m/min te izradu različitih debljina do 232 mikrona za taktilni i reljefni efekt
Veća fleksibilnost, kraće naklade, brži rokovi isporuke i personalizacija
Automatska korekcija pomaka, rastezanja, skupljanja i pomicanja u hodu uz MGI ARTIFICIAL INTELLIGENCE SMARTSCANNER (AIS
Moguća je upotreba metaliziranih, holografskih i obojenih folija širine od 100 do 420 mm
Zadaci su relativno jednostavni za razumjeti i implementirati, za razliku od tradicionalne opreme za oplemenjivanje koja zahtijeva dugotrajnu i skuplju pripremu
Mogu se koristiti premazani, nepremazani i teksturirani papiri, samoljepljive naljepnice...

Saznajte više

MGI JetVarnish 3D Web 400

Konica Minolta JETvarnish 3D Web alat nudi brojne funkcionalnosti, uključujući…

Izvanredni efekti

Spot UV lak i hot-foil tisak na premazane i nepremazane materijale, sintetiku, papir i lagani karton.

Modul za izrezivanje

Opcionalna polu-rotacijska jedinica za izrezivanje za in-line doradu etiketa, standardno opremljena s dva noža za rezanje i Gap Master sustavom.

Jednostavnost korištenja

Uređaj je brz za savladavanje, jednostavan za korištenje i ne zahtijeva posebne vještine, čime se operaterima omogućuje da se posvete drugim zadacima.

Potpuno rotacijska flekso UV stanica

In-line rotacijska flekso UV jedinica za potpuno lakiranje i nanošenje prajmera, omogućuje UV lakiranje i hot-foil doradu na širokom rasponu materijala, uključujući i nepremazane podloge.

iFoil tehnologija

Digitalne/varijabilne 2D i 3D lak i folija dorade, koje dodaju vrijednost samoljepljivim etiketama i fleksibilnoj ambalaži, uz mogućnost odabira metalik, holografskih i obojenih folija

MGI AI Smartscanner (AIS)

Sustav za registraciju laka i folija automatski skenira svaki arak i uspoređuje ga s digitalnom maskom; bez registarskih oznaka, čime se smanjuje vrijeme pripreme i količina otpada.

Odmotavač i namotavač role

Varijabilna širina trake, automatski izračun promjera role, podešavanje napetosti, stol za spajanje i još mnogo toga.

Visoka proizvodna brzina i savršena kvaliteta lakiranja

Brzine do 42 metra u minuti, taktilni i reljefni (embossing) efekt od 7 do 232 mikrona.

Specifications
Printing Speeds	Up to 42m/mn¹ (depending on application).
Supported Web Widths	From 100 mm up to 420 mm
Finishing Width	The maximum image width is 405 mm
Substrate Types²	From 50 up to 400 microns (μm)Coated, uncoated and textured paper, film or labelSelf-adhesive labelsWhite or transparent synthetics, PP, PE, POPP, PETLight cardboard/folding cartonShrink film: PVC, PETG
Wide Compatibility	Compatible with the overall web-to-web printingTechnologies, narrow web digital presses and thetraditional offset or flexo narrow web presses.
Unwinder	Maximum roll diameter capacity: 850 mmStandard inside core diameter: 3 inchesMaximum roll weight: ±120 kg
UV Flexo Station	An integrated flexo station for full size sleeve coating inrotary. This station is used to apply a UV protection varnishor primer prior to finishing. The module comes with an UVdryer. The station is equipped with an anilox cylinder.Additional anilox cylinders are available as upgrade options.
Spot UV Coating andEmbossing Station	This station uses MGI award-winning inkjet technologyfor producing Spot UV Coating. Any defined label area canreceive Spot UV Coating with or without raised 3D textureeffects. A simple grey level TIFF file designed by Prepresscontrols the surface area and the thickness of thevarnish applied over the printed roll. This 100 % digitalprocess eliminates traditional plates, screens and dies.
Varnish thickness	From 7² to 232² μm of varnish thickness(from 2D flat coats to 3D raised effects).
Inline curing	The unit is equipped with an UV dryer and a coolingdrum for optimum web temperature control. The curingsequence also includes a special forward and backward rollmotion to dry each label and eliminate waste between runs.
UV Varnish	Gloss varnish 99 GU
Hot Foiling Station	The hot foiling station adds luxurious effects and brandvalue to label and packaging products. Any defined labelarea can receive digitally-controlled foil with or withoutraised effects.A simple grey level TIF file designed by Prepresscontrols the surface area and the definition of the foilapplied on the printed roll. This 100 % digital processeliminates traditional dies, plates and screens.Foil application can be bypassed when not necessary.
Foil rolls	Foils are delivered on rolls:Foil widths from 100 mm up to 420 mmFoil roll core diameter: 1’’ and 3’’Foil lengths from 400 m up to 2,000 mUp to 3 rolls can be used simultaneously duringthe production
Die Cutting Unit	A semi-rotary die cutting unit is available as anoption to finish labels in-line on the JETvarnish 3DWeb. The unit uses a 21’’ magnetic cylinder and anautomatic registering system. 2 slitter knives areincluded as well as a matrix rewinder.format in semi-rotary: 100 up to 480 mmmaximum matrix diameter: 600 mm2 slitter knives as standard: 10 maxGap master system for die height adjustment as an option.
Rewinder	Servo-motorized unit850 mm maximum roll diameter capacityStandard inside core diameter: 3 inchesMaximum roll weight: ± 120 kg
Printing PressCompatibility List	Digital: Konica Minolta AccurioLabel, HP Indigo WS4500, HPIndigo, WS6800, Epson, Xeikon, EFI, Durst, etc.Offset: All manufacturers and technologies: UV, H₂O orWATERLESSFlexo: All manufacturers and technologies: UV or Water based
Dimensions & Weight	400 V - 3Ph240 V - 1PhDry air compressor (oil-free): 8 bar/102 psi - 24 m³/h/6 cfmAll speeds are nominal
Corona substratetreatment module	In-line system made to optimise varnishadhesion on complex printed substrates
Variable Data Printing	To manage and edit files on the workstation,Full variable data (text, graphic, image) for both 2D/3D SpotCoating and Hot Foiling areas,Integrated barcode (1D/2D) reader system & controller,Raster Image Processor (RIP) as an option

MGI JETvarnish 3D Web brošura

Preuzmite brošuru proizvoda odmah i imajte sve informacije pri ruci.

Preuzmite brošuru

Etikete koje se ističu iz mase.

Etikete su sve važniji dio tržišta tiska i nastavljaju poticati potražnju za kreativnim i visokokvalitetnim rješenjima. Kako marketing postaje sve fokusiraniji i konkurentniji, raste i potreba za etiketama koje privlače pažnju. Istovremeno, stalne promjene regulative i prelazak na male i srednje naklade prisiljavaju proizvođače etiketa da prate tempo, često na štetu profitabilnosti.

Kako biste ostali konkurentni u industriji koja se stalno mijenja, potrebno je ostvariti veću dobit kroz povećani obrt manjih, hibridnih tiskarskih poslova što zahtijeva digitalno rješenje. Kombinacija MGI JetVarnish 3D Web 400 uređaja za doradu i AccurioLabel 400 omogućuje brzu, jednostavnu i učinkovitu proizvodnju malih naklada. Na taj način, proizvodnja visokoučinkovitih, dodatno oplemenjenih etiketa postaje poput tiskanja profita.

Find out more

Professional Printing, application, igniting print possibilities, photo, picture, print sample, professional printing

MGI JETvarnish 3D Web 400

Karakteristike

MGI JetVarnish 3D Web 400

MGI JETvarnish 3D Web brošura

Etikete koje se ističu iz mase.

Related Hardware