MGI JETvarnish 3D Web

Stvorite nevjerojatne efekte utemeljene na mreži

Rješenje za tiskare za tisak naljepnica i proizvodnju prilagodljivog pakiranja
Za linijski dvodimenzionalni i trodimenzionalni UV premaz, reljefnu vruću foliju, izrezivanje s kalupom i zarezivanje
Omogućuje savršeno registriranje, brzine do 42 m/min i stvaranje dodirnih i reljefnih efekata debljine do 232 mikrona
Veća fleksibilnost, kraći prolazi, brže vrijeme isporuke i personalizacija
Automatsko podešavanje ukošenja, rastezanja, sakupljanja i pomicanja u hodu s inteligentnim pametnim skenerom MGI ARTIFICIAL INTELLIGENCE SMARTSCANNER (AIS)
Moguće je upotrijebiti metalnu, holografsku i foliju u boji širine od 100 do 420 mm
Zadatke je relativno lako razumjeti i primijeniti, za što je na klasičnoj opremi za ukrašavanje potrebno više vremena i skuplja priprema
Može se upotrebljavati premazani i nepremazani papir, papir s teksturom, foliju ili samoljepljive naljepnice

ZATRAŽITE PONUDU

Podijeli

Karakteristike

MGI JetVarnish 3D Web

Naš JETvarnish 3D Web nudi brojne mogućnosti, uključujući…

Nevjerojatni efekti

Nanošenje točkastog UV laka i vruće folije na premazane i nepremazane materijale, sintetiku, papir i tanji karton
Jedinica za izrezivanje s kalupom

Opcija za rezanje etiketa: polu-rotacijska jedinica u liniji, s dva standardna noža za rezanje i sustavom za upravljanje razmacima
Lakoća upotrebe

Način rada uređaja lako se može razumjeti, jednostavan je za upotrebu i potrebno je manje posebnih vještina, čime se operateri oslobađaju za druge poslove
Potpuno okretna flekso UV stanica

Linijska Rotary Flexo UV stanica, za potpuno lakiranje i premazivanje, omogućuje UV lakiranje i završnu obradu vrućim folijama na velikom broju podloga, uključujući nepremazane materijale
Tehnologija iFoil

Digitalno/varijabilno dvodimenzionalno i trodimenzionalno premazivanje i ukrašavanje folijom, kao dodatnu vrijednost za samoljepljive naljepnice i fleksibilno pakiranje, uz izbor između metalne, holografske i folije u boji

MGI pametni skener s umjetnom inteligencijom (Artificial Intelligence Smartscanner, AIS)

Sustav za registraciju laka i vruće folije automatski skenira svaki list i uspoređuje ga s digitalnom maskom; nema registracijskih oznaka, čime se smanjuje vrijeme za pripremu i količina otpada
Uređaj za odmatanje i namatanje role

Varijabilna širina mreže, automatsko izračunavanje promjera role, podešavanje zategnutosti na stolu za rezanje i drugo
Visoka produkcijska brzina i savršena kvaliteta premazivanja

Brzine do 42 metra u minuti, dodirni i reljefni efekti od 7 do 232 mikrona
Široka kompatibilnost

Kompatibilan s digitalnim, flekso i offset tehnologijama ispisa web-to-web

Specifikacije i preuzimanja

Tehnički podaci

METEOR DP8700Se+ 4-COLOR PRINTING
Colour print speed	Up to 71⁽¹⁾ A4 sheets per minute
Print quality and line screens	Print resolution up to 3,600 dpi and line screens ranging from 130 to 270 lpi
Printable formats	Min. 100 x 148 mm – 3.9 x 5.8’’ Max. 330 x 650* mm – 13 x 25,6’’⁽²⁾
Supported substrate thicknesses	Paper from 65 to 350 g/m² or 350 μm Synthetic: specific substrats such as Teslin® and Folex® Envelope from 100 to 400 μm with/without window
Paper input	2 Internal Trays (trays #1, #2) 1,500 sheets total capacity (500 + 1,000 sheets) 3 trays (#3, #4, #5) linking high capacity feeder with air feed system 3,930 sheet total capacity 2 x 1.390 + 1.150⁽²⁾. Max. size is 330 x 650* mm from tray #5, otherwise 330 x 487 mm
Registration	Precise registration with ASCA (Automated Skew and Centering Adjustment) system. Comparable to offset, applies to all printed works (front-back, page-page at ± 0.5 mm)
Paper output	High pile motorized stacker for hosting up to 60 cm of paper height
Electrical specifications	Feeder: 1x (230V / 1P + N + E - 10 A) Printer: 1x (230V / 1P + N + E - 25 A) Computer & Rip: 3x 1x (230V / 1P + N + E - 16 A)
Operating environment	Required temperatures:18° to 30°C Optimum between: 20° to 22°C Operating Humidity: 30% to 50% RH Optimal condition: 40%
Dimensions & weight	L x W x H: 5,56 x 1,31 x 1,93 meters 1,780 kg (Meteor DP8700 Se+ and iFOIL T)
External Fiery EFI Fiery IC-308 controller	100% compatible with market standard software solutions like Adobe InDesign

IFOIL-T HOT FOILING STATION
Supported thicknesses with foil without toner overprinting	Min. 80 g/m² equals to 80 μm prior to printing and possible lamination Max. 350 g/m² equals to 350 μm prior to printing and possible lamination
Supported thicknesses with foil and toner overprinting	Min. 150 g/m² equals to 150 μm prior to printing and possible lamination Max. 350 g/m² equals to 350 μm prior to printing and possible lamination
Printing speed	Up to 50⁽¹⁾ A4 sheets per minute
Paper formats	Min. 110 x 220 mm Max. 330 x 650* mm⁽²⁾
Substrats	The hot foil process is compatible with most the of substrates supported by the METEOR Digital Press (non-coated or coated paper, envelops, PVC, Teslin, etc.)
Hot foils	Utilizes compatible hot foils available on the market.⁽³⁾
Rolls	Hot foil are delivered on rolls. Standard roll is 320 mm width and 305 meter long, using an one inch core. Possibility to use smaller widths such as 100 mm and add them upon the same axis for laying up to 2 simultaneous colours. Standard 1’’ core, 3‘‘ core as an option
Foil manager software suite	Meteor Manager is a powerful supervision softwareplatform. Within a single tool, it gives access to the operator to the entire parameter to manage and setup the productionfrom 4-color printing through hot foil finishing. All the parameters can be also stored for further reprinting whichsaves you time and improves your efficiency
Electrical specifications	iFOIL T: 2x (230V / 1P + N + E - 25 A) 1x (230V / 1P + N + E - 16 A) Stacker: 1x (230V / 1P + N + E - 6 A)
Operating environment	Required temperatures:18° to 30°C Optimum between: 20° to 22°C Operating Humidity: 30% to 50% RH Optimal condition: 40%
Dimensions & weight	L x W x H: 5,56 x 1,31 x 1,93 meters 1,780 kg (Meteor DP8700 Se+ and iFOIL T)

All specifications refer to A4-size paper of 80 g/m² quality.

⁽¹⁾ Print speed may vary according to the substrate and print parameter used
⁽²⁾ Using tray #5 and max. 250 gsm/250 μ in simplex
⁽³⁾ Please contact Konica Minolta to check your substrates/toner/foil compatibility

The support and availability of the listed specifications and functionalities varies depending on operating systems, applications, network protocols as well as network and system configurations.
Some of the product illustrations contain optional accessories.
Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
Konica Minolta does not warrant that all specifications mentioned will be error-free.
Microsoft, Windows and the Windows logo are trademarks, or registered trademarks, of Microsoft Corporation in the United States and/or other countries.
All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

⁽¹⁾ Without calibration and stabilization
⁽²⁾ Using tray #5 and max. 250 gsm/ 250 μ in simplex

Preuzimanja

Profesionalni pisač MGI jetvarnish 3D Evo

MGI JETVARNISH 3D EVOLUTION

MGI JETVARNISH 3DS

MGI JETVARNISH 3D One

Preuzmite brošuru o proizvodu kako biste imali sve informacije.

MGI JETvarnish 3D Web brošura (en)