MGI JETvarnish 3D One

MGI JETVARNISH 3D One

  • VISOKA UČINKOVITOST uz ispis u jednom prolasku
  • DIGITALNI vrhunski uređaj za dekoriranje brzine do 2077 A3 listova na sat
  • UV TINTNA TEHNOLOGIJA u kombinaciji s Konica Minolta piezoelektričnim ispisnim glavama na zahtjev, za visoku kvalitetu  
  • AIS SmartScanner za automatiziranu registraciju listova
  • UKLJUČEN SOFTVERSKI PAKET koji vam omogućuje vam praćenje zadataka, upravljanje redoslijedom poslova, kreiranje radnih naloga, ponavljanje ispisa i prilagodbu vašeg AIS skenera s jednim jednostavnim i samorazumljivim alatom.
  • PREMAZIVANJE OFSETNIH I DIGITALNIH OTISAKA s laminiranjem i bez njega radne procese čini iznimno fleksibilnima
  • VARIJABILNA DEBLJINA PREMAZA između 21 i 116 mikrona za 2D i 3D taktilne efekte u jednom prolasku
  • EKOLOŠKI PRIHVATLJIVO LINIJSKO LED SUŠILO za okruženje bez ozona
MGI JETvarnish 3D One

Karakteristike

Karakteristike

Značajke

Nemojte se više ograničavati na prekrasno ispisane zadatke – vrijeme je da svojim klijentima ponudite veću vrijednost i kreativnost! JETVARNISH 3D One zadatke ispisa pretvara u spektakularne i neodoljive ispise koji će odmah pridobiti pažnju vaših klijenata. JETVARNISH 3D One pojednostavljuje lokaliziranje digitalnog ispisa posebnim premazima, isticanje definiranih područja i dodavanje 3D efekata – omogućavajući vam da ponudite atraktivne, živopisnije i taktilne ispise.

MGI JETvarnish 3D One

Specifikacije i preuzimanja

Specifikacije i preuzimanja
System Configurations - JETVARNISH 3DS
Printing Technology MGI’s exclusive inkjet engine technology
Drop-on-Demand (DoD) technology
Piezoelectric printheads,developed and manufactured by Konica Minolta
Single pass printing
Flexible & scalable printing architecture
Coating Thicknesses Depending on your file, the inks used and the type of
surface of your sheet, the coating thickness can vary.
On laminated and aqueous coating: 21 μm – 232 μm*  
for 3D raised effects and tactile finish. On toner and  
coated paper: 30 μm – 116 μm/232* μm for 
3D raised effects and a tactile finish
Production speed In 2D/flat mode:
Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode:
Up to 1,468 A3 sheets per hour (with 43 μm)
Up to 547 A3 sheets per hour (with 116 micron)
Registration SmartScanner coupled with Artificial Intelligence (AIS)  
for fully real-time  automated sheet-to-sheet 
registration process. No crop mark required.
Formats Min. 21 x 29.7 cm / 8 x 11.8”
Max. 36.4 x 102 cm / 14.33 x 40.15”
Max. Printable Width 35.3 cm
Substrate Thickness Min: 135 gsm and not less than 150 μm or 6 mil before printing & lamination
Max: 450 gsm and not more than 450 μm or 18 mil before printing & lamination
Motorized height-adjustment print heads
Substrates** Printing on most matte or glossy laminated surfaces,
with or without aqueous coating, layered paper, plastic, 
PVC and other coated materials
Varnish on toner Spot 3DS coat directly onto most digital prints with 
no lamination or coating required
UV Coatings and capacity 3D varnish delivered with a 10-litre tank capacity
High Capacity 
Automatic Feeder
Feeder able to handle a paper pile up to 30 cm
2,500 sheets at 135 gsm
High Pile Output Stacker Stacker able to handle a paper pile up to 30 cm
2,500 sheets at 135 gsm
Paper Path 100% flat paper path; Vacuum feed system
Air feed system; Automatic double sheet detection
In-line LED dryer “On-the-fly” drying & curing via integrated LED
Spot Coated sheets can be immediately finished     
or handled, no additional drying time required
Front End System Dedicated PC; CPU + touch-screen + keyboard/mouse
Ethernet connection 10/100/1000 BT (RJ 45)
Built-in Application Software Suite
Comprehensive job queue management
Predictive printing cost calculator 
(coating consumption)
Dedicated image editor to do local and fast 
image editing prior to production
Maintenance & 
Remote Technical Support
Daily maintenance completed in less than 10 minutes
Majority of procedures are automated
Automatic cleaning system
From cold start to production in less than 10 minutes
Remote troubleshooting & support via included video/  
web camera (high speed internet connection required)
Operator Panel Integrated user-friendly LCD touch-screen
Options

Twin bar option:
2nd print engine to increase 3D print speed and coating  
thickness, up to 232 μm variable data option. 
Variable data option:
Complete system including RIP, barcode reader and  
MGI software to automatize the association between 
a pre-printed barcode and its specific spot coating file

Dimensions 
(L x W x H) & 
Weight

4.26 (5.47*) x 1.14 x 1.80 meter   
(with the longest paper extensions installed)
1 metre clearance required on all 4 sides

± 1,100 kg

Electrical requirements 7.5 kW (32 A) at 220–240 Volts; 2 plug CEE/IP44 32A (1P+N+E)
Operating Temperature: 18 to 30°C
Environment Relative humidity: between 35 – 55%  
(no condensation)
Respecting the 
Environment
Eliminates resource waste (wasted electricity,paper and varnish)
No plates (offset) or screens (screen printing)
No cleanup or preparation between jobs
Drastic reduction in amount of consumables and    
use of bulk packaging.
Coating without volatile solvent.


The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameter used
3) confirm substrate/toner compability with KM

* With the Twin Bar
** The used substrate needs to be either coated or laminated. Otherwise the media is absorbing the varnish and the destred effect might get lost
 

System Configurations - iFOIL S
Production Speed Up to 2,298 A3 sheet size per hour 
(or 20 meters/min)
Formats Min: 21 x 29.7 cm 
Max: 36.4 x 102 cm
Hot foil stamping area 32 x 102 cm
Substrate thickness Min: 135 gsm and not less than 150 μm/6 mil 
before printing and lamination
Max: 450 gsm and not more than 450 μm/18 mil    
before printing and lamination
Motorised height-adjustment print heads
Substrates Most matte or glossy laminated surfaces, with or    
without aqueous coating, layered paper, plastic, 
PVC and other coated materials
Most digital prints without any lamination or coating
Foil rolls Standard internal core: 1 inch - Min./Max. widths:      
10/36 cm
400 meter length (average)
Up to 2 rolls loaded simultaneously on the same holder 
3” internal core is optional
Embossing From 21 μm to 116 μm thickness 
From 21 μm to 232 μm thickness (Twin Bar optional)
Compatibility Online module that connects to all JETVARNISH 3DS
Dimensions (L x W x H) 
Weight

2.09 x 1.24 x 1.80 meter 
± 850 kg

Electrical requirements 7.5 kW (32 A) at 220–240 V – 50/60 Hz
2 plugs CEE/IP44 32A (1P+N+E)
Options High capacity stacker for paper stacking up to 
60 cm paper height
3” core inch foil holder

Slični uređaji

Slični uređaji